Välj land för leverans

dbx
Black friday

dbx 676 Mikrofonförförstärkare

5
dbx
Black friday

dbx 676 Mikrofonförförstärkare

5
Tube microphone preamplifier. The 676 offers a pristine high-voltage, Class-A tube preamp section that runs on 250 volts, so your signal can be as crystal clean or dirty as you need it to be. The 676 also incorporates the compressor/limiter design from the highly-sought after dbx162SL, as well as a 3-band parametric EQ with sweepable mids. The...
Läs mer
I lager för webbutik 1 stycke
Skickas idag ,
2024-11-25
16,009 kr
17,341,77 kr
- 8 %
Mikrofonförförstärkare dbx 676 Mikrofonförförstärkare

dbx 676 Mikrofonförförstärkare

16,009 kr
17,341,77 kr
- 8 %

Produktkod: DD-676 | ID: 228017

dbx 676 Mikrofonförförstärkare

Tube microphone preamplifier. The 676 offers a pristine high-voltage, Class-A tube preamp section that runs on 250 volts, so your signal can be as crystal clean or dirty as you need it to be. The 676 also incorporates the compressor/limiter design from the highly-sought after dbx162SL, as well as a 3-band parametric EQ with sweepable mids. The 676 provides audio professionals with the perfect channel strip for recording and live applications alike with its military-grade build and vintage-inspired controls, VU metering and state-of-the-art optional digital output card. It contains instrument input on the front panel, and microphone XLR input, microphone XLR outputs and line outputs on the back panel. Operating voltage: 100 - 240 VAC, 50/60 Hz - Power requirements: 20 W - Dimensions: 89 x 483 x 203 mm - Weight: 3,7 kg

Ytterligare beskrivning på ditt språk är inte tillgänglig ännu. Beskrivningen på engelska kan hjälpa.

Specifications

Mic Preamp ConnectorFemale XLR Pin 2 Hot; Electronically balanced/unbalanced
Mic Preamp Input Impedance1.9 kΩ
CMRR>85 dB from 20 Hz to 3 kHz, >70 dB from 3 kHz to 20 kHz
Instrument Input ConnectorTip-Sleeve ¼" Jack
Input Type(instrument) Unbalanced
Instrument Input Impedance500 k Ω
Max Input(instrument) +21dBu unbalanced
Preamp Insert ConnectorTip-Ring-Sleeve ¼", RF filtered
Preamp Insert TypeUnbalanced, Tip = send, Ring = return
Line Outputs (Preamp & Compressor/Limiter) ConnectorMale XLR and Tip-Ring-Sleeve ¼" (Pin 2 and Tip hot)
Line Outputs (Preamp & Compressor/Limiter) TypeServo-balanced/unbalanced
Line Outputs (Preamp & Compressor/Limiter) ImpedanceBalanced 30 Ω, unbalanced 15 Ω
Line Outputs (Preamp & Compressor/Limiter) Maximum Output Level> +21 dBm (into a 600 ohm load)
Compressor Sidechain Insert ConnectorTip-Ring-Sleeve ¼", RF filtered
Compressor Sidechain Insert TypeUnbalanced, Ring = output, Tip = input
Compressor Sidechain Insert Impedance1 kΩ (output), 50 kΩ (input)
Vacuum Tube Type12AU7A / ECC82
Vacuum Tube Grid Power Supply+250V DC
Vacuum Tube Heater Power Supply+12V DC
Frequency Response (Mic Input)20 Hz to 50 kHz, +0/-1dB, 40 dB gain
Frequency Response (Instrument Input)30 Hz to 70 kHz, +0/-1dB, unity gain
THD + Noise (Mic In to LIne Out)0.25% typical at 0 dBu out, 1 kHz, 40 dB gain
THD + Noise (Instrument In to Line Out)0.2% typical at 0 dBu out, 1kHz, unity gain
Equivalent Noise LevelTypically > -123 dBu with a 150 Ω source load, 22 Hz to 22 kHz
Noise FloorMic Insert to Comp Output: <-93 dBu, unity gain, EQ flat and no gain reduction
Preamp Function Switches/Controls: Instrument InputSelects between microphone XLR input and front panel ¼" instrument input
Preamp Function Switches/Controls: +48VSends +48 VDC through 6.81 kΩ resistors to pins 2 and 3 of the microphone input
Preamp Function Switches/Controls: 20dB PadAttenuates the microphone input by 20 dB
Preamp Function Switches/Controls: Polarity InvertReverses pins 2 and 3 of the microphone input XLR
Preamp Function Switches/Controls: 80 Hz Low CutEnables an 80 Hz, 12 dB/octave high pass filter in the microphone and instrument signal path
Preamp Function Switches/Controls: Gain Control Range-∞ to +55 dB for Microphone Input; -∞ to +40 dB for Instrument Input
Preamp Function Switches/Controls: Post Tube Attenuation-∞ to 0 dB
Preamp Function Switches/Controls: Peak IndicatorIlluminates RED when the Preamp is within 3 dB of clipping
EQ Low Frequency100 Hz, Low-pass shelving filter
EQ High Frequency10 kHz, High-pass shelving filter
EQ Mid FrequencySweepable from 100 Hz to 8 kHz
EQ Function Switches/Controls: NarrowSelects the "Q" of the MID Frequency EQ. "OUT" position Q = 0.9; "IN" position Q = 2.9
EQ Gain(All Bands) Sweepable from -15 to +15 dB
Compressor Threshold Range-40 dBu to +20 dBu
Compressor Threshold CharacteristicSelectable OverEasy™ or Hard Knee
Compressor RatioVariable 1:1 to ∞:1; 60 dB maximum Compression
Compressor Attack/Release ModesSelectable Manual or Auto
Compressor Manual Attack TimeScalable program-dependent; Typically 400 dB/msec to 1 dB/msec
Compressor Manual Release TimeScalable program-dependent; Typically 4000 dB/sec to 10 dB/sec
Compressor Auto Attack TimeProgram-dependent, typically 15 ms for 10 dB, 5 ms for 20 dB, 3 ms for 30 dB
Compressor Auto Release TimeProgram-dependent, typically 120 dB/sec
Compressor Output Level Control Range-20 dB to +20 dB
Compressor Peak IndicatorIlluminates RED when the Compressor/Limiter is within 3 dB of clipping
Limiter Typedbx PeakPlus™
Limiter Threshold Range-4 dBu to + 22 dBu (off)
Limiter Ratio∞:1
Limiter Attack and ReleaseProgram-dependent
Power SupplyUniversal switch-mode
Operating Voltage100 - 240 VAC, 50/60 Hz
Power Requirements20 Watts
FuseT2.5AL 250V
Turn-On TimeApproximately 2 seconds
Dimensions3.5"H X 19"W X 8"D (88.9mmH X 482.6mmW X 203.2mmD)
Weight8.1 lbs (3.7 kg)
Shipping Weight11.0 lbs (5.0 kg)


5 / 5

Baserat på antalet omdömen: 1

5 1
4 0
3 0
2 0
1 0

Alla recensioner kommer från verifierade kunder som har köpt en produkt från oss tidigare.

Z

Zoltán V.

hu Flagga

Ungern

13.03.2023

Komoly megjelenésű eszköz, logikus kezelőfelülettel, brutál sound.

Automatiserad översättning

Denna recension kan inte översättas.